Car Gauge Pro (OBD2 + Enhance) apk Description
The application will communicate with the vehicle computers at the 16 Pin OBD II diagnostic connecter. Most of the OBD II connector location should be under the Steering Wheel Compartment. ELM 327 bluetooth device is required to make this application work. Car Gauge Pro not only can be exciting with gauges, it is a professional scan tool. Do you have a check engine light on? Do you want to know the Readiness Status will pass for a Smog Inspection? Do you want to check the functionality of the sensors and determine the status of the Mode 5/6 Emission On-board Test(Some Models may not support it)? Car Gauge Pro will show you.
See information below for the hardware type requirement.
[Vehicle Support]
* OBD II Generic - All OBD II complaint vehicles
* Enhanced Ford - 1996 - 2008
* Enhanced GM - 1996 - 2007
* Enhanced Nissan - 2001 - 2006
* Enhanced Toyota - 2000 - 2008
* Enhanced KIA - 1996 - TBD
[OBD II Functions]
* Mode 1 - Data Parameters
* Mode 2 - Freeze Frame Data
* Mode 3 - Check Current Faults
* Mode 4 - Clear Faults
* Mode 5 - O2 Sensor Test Result
* Mode 6 - Emission Onboard Test Result
* Mode 7 - Check Pending Faults
* Mode 8 - Enable Evap Test
* Mode 9 - Vin, ECU Name, Performance Tracking Data, CALID and etc
[Enhanced Functions]
* Ford - Check/Clear Faults, Self Test, KOEO, KOER and Enhanced Data with combined 1075 PIDS (ISO, PWM, CAN)
* Nissan - Check/Clear Faults, Self Test and Enhanced Data with combined 634 PIDS (KWP2000-ECM, TCM, ABS, )
* GM - Check/Clear Faults and Enhanced Data with combined 189 PIDS (VPW-Powertrain)
* Toyota - Enhanced Data (ISO-Powertrain) + Read/Clear Faults (ISO-Airbag)
* Kia - Enhanced Data (ISO-Powertrain)
Some Models will not support Enhanced Function
HARDWARE REQUIREMENT: ELM 327 or STN Bluetooth Adapter.
Vendors: CHX, OBDII, Vgate and OBDLink MX Bluetooth Device tested OK.
Car Gauge Pro (OBD2 + Enhance) apk Videos
No comments:
Post a Comment